Collection
Showing 97 - 120 of 352
Cat Pumps 3541DHS
Material: Stainless Steel
Flow rate: 170 lpm
Pressure range: 6.9 – 69 bar
Speed: 765 rpm
Inlet pressure: -0.35 – 4.8 bar
Max. fluid temperature: 60°C
Flow rate: 170 lpm
Pressure range: 6.9 – 69 bar
Speed: 765 rpm
Inlet pressure: -0.35 – 4.8 bar
Max. fluid temperature: 60°C
Log in for prices
Cat Pumps 3507
Material: Nickel Aluminum Bronze
Flow rate: 38 lpm
Pressure range: 6.9 – 345 bar
Speed: 915 rpm
Inlet pressure: -0.35 – 4.8 bar
Max. fluid temperature: 71°C
Flow rate: 38 lpm
Pressure range: 6.9 – 345 bar
Speed: 915 rpm
Inlet pressure: -0.35 – 4.8 bar
Max. fluid temperature: 71°C
Log in for prices
Claw Coupling 20–24mm
Aluminium Claw coupling, also known as a spider coupling, for Cat Pumps high-pressure pumps with a 20 mm pump shaft and 24 mm motor shaft. Suitable for Cat Pumps models 5CP, 310, 323, 340, 350, 390.
Log in for prices
Pulsation damper 020100
Filling pressure: On request
Max pressure: 105 BAR
Max flow rate: 265 l/min
Max temperatures: 82°C
Connection: 1-1/4 NPTM
Safety factor: (4/1)
Volume: 2000 cc
Length: 217mm
Diameter: 172mm
Material : Coated steel
Diaphragm material: NBR
Max pressure: 105 BAR
Max flow rate: 265 l/min
Max temperatures: 82°C
Connection: 1-1/4 NPTM
Safety factor: (4/1)
Volume: 2000 cc
Length: 217mm
Diameter: 172mm
Material : Coated steel
Diaphragm material: NBR
Log in for prices
Cat pumps 68 Frame plunger pump 6801
With an impressive flow rate of 57 liters per minute and a dynamic pressure range of 7 to 485 bar, the Cat Pumps plunger pump 6801 provides the performance needed for even the most demanding applications.
Log in for prices
Lantern 701730 for 5CP pumps
Lantern 701730 is suitable for Cat Pumps 5CP pumps and is made of aluminum. The motor protection article is designed to protect the motor and rotating parts of your pump.
Log in for prices
Cat pumps 68 Frame plunger pump 6801
With an impressive flow rate of 57 liters per minute and a dynamic pressure range of 7 to 345 bar, the Cat Pumps plunger pump 6801 provides the performance needed for even the most demanding applications.
Log in for prices
8 Frame Plunger Pump - 781
Material: Stainless Steel
Flow: 4.7 gpm / 17.8 lpm
Pressure: 100 – 5000 psi / 6.9 – 345 bar
Speed: 1750 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160° F / 71° C
Flow: 4.7 gpm / 17.8 lpm
Pressure: 100 – 5000 psi / 6.9 – 345 bar
Speed: 1750 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160° F / 71° C
Log in for prices
Direct-Drive – 2SF13ES
Material: Brass
Flow: 3.4 gpm / 13 lpm
Pressure: up to 1886 psi / up to 130 bar
Speed: 2800 rpm
Inlet Pressure Range: 1.5 to 75.4 psi / 0.1 to 5.2 bar
Max. medium temp.: 160°F / 71°C
Flow: 3.4 gpm / 13 lpm
Pressure: up to 1886 psi / up to 130 bar
Speed: 2800 rpm
Inlet Pressure Range: 1.5 to 75.4 psi / 0.1 to 5.2 bar
Max. medium temp.: 160°F / 71°C
Log in for prices
15 Frame Plunjer Pomp - 660
Material: Brass
Flow: 10.0 gpm / 38 lpm
Pressure: 100 – 3000 psi / 6.9 – 207 bar
Speed: 1429 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160°F / 71°C
Flow: 10.0 gpm / 38 lpm
Pressure: 100 – 3000 psi / 6.9 – 207 bar
Speed: 1429 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160°F / 71°C
Log in for prices
3 Frame Piston Pump - 431
Material: Stainless Steel
Flow: 5.0 gpm / 19 lpm
Pressure: 100 – 1000 psi / 6.9 – 69 bar
Speed: 1040 rpm
Inlet Pressure Range: -8.5 to 40 psi / -0.6 to 2.8 bar
Max. medium temp.: 160°F / 71°C
Flow: 5.0 gpm / 19 lpm
Pressure: 100 – 1000 psi / 6.9 – 69 bar
Speed: 1040 rpm
Inlet Pressure Range: -8.5 to 40 psi / -0.6 to 2.8 bar
Max. medium temp.: 160°F / 71°C
Log in for prices
3CP Plunger Pump – 3CP1130
Material: Brass
Flow: 2.4 gpm / 9.1 lpm
Pressure: 100 – 2200 psi / 6.9 – 152 bar
Speed: 1725 rpm
Inlet Pressure Range: Flooded to 70 psi / Flooded to 4.8 bar
Max. medium temp.: 160°F / 71°C
Flow: 2.4 gpm / 9.1 lpm
Pressure: 100 – 2200 psi / 6.9 – 152 bar
Speed: 1725 rpm
Inlet Pressure Range: Flooded to 70 psi / Flooded to 4.8 bar
Max. medium temp.: 160°F / 71°C
Log in for prices
3 Frame Plunger Pump - 240
Material: Brass
Flow: 3.6 gpm / 13.6 lpm
Pressure: 100 – 1200 psi / 6.9 – 83 bar
Speed: 1725 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160°F / 71°C
Flow: 3.6 gpm / 13.6 lpm
Pressure: 100 – 1200 psi / 6.9 – 83 bar
Speed: 1725 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160°F / 71°C
Log in for prices
3 Frame Plunger Pump - 230
Material: Brass
Flow: 2.3 gpm / 8.7 lpm
Pressure: 100 – 1500 psi / 6.9 – 103 bar
Speed: 1725 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160°F / 71°C
Flow: 2.3 gpm / 8.7 lpm
Pressure: 100 – 1500 psi / 6.9 – 103 bar
Speed: 1725 rpm
Inlet Pressure Range: Flooded to 60 psi / Flooded to 4.1 bar
Max. medium temp.: 160°F / 71°C
Log in for prices
Pressure regulator 39269
The Cat Pumps pressure regulator 39269 is equipped with a hand wheel and a micro switch, allowing you to easily set the pressure and operate it safely. With a 3/8" BSP connection, this pressure regulator is suitable for various applications where precise
Log in for prices
Claw Coupling 30–42mm
Aluminium Claw coupling, also known as a spider coupling, for Cat Pumps high-pressure pumps with a 24 mm pump shaft and 38 mm motor shaft. Suitable for Cat Pumps models 650, 660, 1050, 1530, 1540, 1560, 1570, 1580, 2510, 2530, 2537.
Log in for prices
Cat Pumps 3560DEx
Model: Cat Pumps 3560DEx
Material: Stainless steel
Flow rate: 76 lpm
Pressure: 275 bar
Speed: 1160 rpm
Max. fluid temperature: 71°C
Material: Stainless steel
Flow rate: 76 lpm
Pressure: 275 bar
Speed: 1160 rpm
Max. fluid temperature: 71°C
Log in for prices
Cat Pumps - Pump head 3535.HS complete
The complete Cat Pumps 3535.HS pump head is fitted with valves and seals and is suitable for Cat Pumps model 3535.HS. Do you want to know more about this article? Please feel free to contact us.
Log in for prices
Cat Pumps - Pump head 56/57/59 complete
The complete Cat Pumps pump head 56/57/59 is equipped with valves and seals and is suitable for Cat Pumps models 56, 57 and 59. Would you like to know more about this product? Please feel free to contact us.
Log in for prices
Cat Pumps - Pump head 5CP5120 complete
The complete Cat Pumps pumphead 5CP5120 features valves and seals and is suitable for Cat Pumps model 5CP5120. Do you want to know more about this article? Please feel free to contact us.
Log in for prices
Cat Pumps - Pump head 1050 complete
The complete pump head 1050 is equipped with valves and seals and is suitable for Cat Pumps model 1050. Would you like to know more about the product? Please feel free to contact us.
Log in for prices
Cat Pumps - Overhaul kit 7CP6111
1 Overhaul kit consists of the following components:
1 x 76933 sealing set NBR pos.300
2 x 76387 Valve set NBR pos.310
3 x 48281 Oil seal NBR pos.070
2 x 06107 Cat Crankcase Oil
1 x 76933 sealing set NBR pos.300
2 x 76387 Valve set NBR pos.310
3 x 48281 Oil seal NBR pos.070
2 x 06107 Cat Crankcase Oil
Log in for prices
Safety and Relief Valve 890710
Safety valve 890710 is made of stainless steel and ensures that the system is not damaged by the built-up pressure by (partly) releasing the pressure. The safety valve is suitable for a pressure of 21 to 103 bar.
Log in for prices
Showing 97 - 120 of 352